RamisoftSolutions
Our software

Specialized structural engineering software

Engineering software that goes all the way to the answer.

RamisoftSolutions is dedicated to one thing: specialized software for structural engineers. Each program takes one engineering problem and solves it completely, from the loads to the last check, with the method and the provision behind every number in plain view.

Explore our software Share an idea
  • Free to start
  • Works offline
  • One account for all three
  • Windows 10 & 11
The FoundaTrix Studio mark: a footing and its pedestal under a load, on the analysis grid. The PileTrix Studio mark: a drilled shaft under its cap with a lateral load, going down into the ground. The StruTrix Studio mark: a braced steel portal frame on two footings under a lateral load, on the analysis grid.

Our software

Three programs, one family.

Each has its own website with everything about it: what it computes, the standards it follows, how to get it and how to reach us about it.

FoundaTrix Studio

Analysis and design of rigid foundations

Any rigid foundation, modelled in 3D: spread, combined, strapped and mat foundations of any outline, carrying any number of pedestals, and pile caps on PileTrix Studio piles.

  • Bearing pressure under every load combination, partial uplift included, with overturning and sliding.
  • Concrete and anchor rods designed to ACI 318-19; steel stands and racks to AISC 360-22.
  • Wizards for vessels, heat exchangers, substation equipment and pipe supports.
Visit foundatrix.com Get it from the Microsoft Store

PileTrix Studio

Lateral and axial analysis of piles and drilled shafts

A single pile or drilled shaft in layered soil, analysed under combined lateral and axial load and checked from the soil to the section.

  • The p-y and t-z response solved together for every load combination.
  • The section checked to ACI 318-25 on a confined-concrete fibre model, with independent soil and equilibrium audits.
  • Drilled shafts, and as a Pro feature precast pretensioned piles and steel H-piles.
Visit piletrix.com Get it from the Microsoft Store

StruTrix Studio

Structural analysis and design of 3D steel frames

Any frame described as joints and members, analysed and designed in three dimensions: buildings, industrial structures, pipe racks, towers, trusses and transmission poles.

  • Every load combination solved to first order or by the AISC 360-22 direct analysis method, with an equilibrium audit of every result.
  • Steel members checked to AISC 360-22 by LRFD or ASD, and the lightest sections that pass chosen for you.
  • ASCE 7-22 combinations generated, and as Pro features tapered poles to ASCE/SEI 48-19 and transmission line design.
Visit strutrix.com Get it from the Microsoft Store

They work together. One account signs in to all three, and they share one cloud: a project can hold frame, foundation and pile designs side by side, and a FoundaTrix Studio pile cap stands on pile models taken from PileTrix Studio designs in the same project. An AI assistant you connect works across all three, as you: it searches your projects, creates models for you to check, and runs what-if analyses on your own computer that change nothing until you apply them.

Our approach

Comprehensive, accurate and complete.

Specialized software earns its place by doing the whole job well. These are the commitments every RamisoftSolutions program is built to.

Comprehensive

The whole design problem in one program: the loads, the analysis, every strength and serviceability check, and the report, without hand-offs to spreadsheets in between.

Engineering accuracy

Methods implemented from the standards themselves and held, by automated tests, to closed-form solutions and to the worked examples published with them.

Completeness

Every check reported, passing or failing, with the governing case, the equation and the provision it comes from. Nothing is hidden behind a single verdict.

Checked from every side

Results are audited independently of the solution that produced them: equilibrium closed, the soil's mobilisation measured, the assumptions stated where they apply.

Free to start

The core analysis and design in each program is free, needs no account and works offline. Sign in only for the cloud and the Pro capabilities.

Your work stays yours

No advertising, no analytics, no telemetry. Projects on your computer never leave it unless you save them to the cloud or let an AI assistant you connected read them.

Built on the documents engineers sign against

  • ACI 318-19 · 318-25
  • ASCE 7-22
  • AISC 360-22
  • FHWA GEC-12
  • PCI RP-156-25
  • ASCE MOP 113
  • IEEE 693 · 605 · 980
  • PIP STC01015

Shape what we build next

Your idea could be our next program.

Our programs grow from the problems engineers bring us. Is there a structural engineering task you still do by hand or in a spreadsheet because no software does it properly? A check you wish your tools made, a standard they should follow, a whole new kind of structure? Tell us: we read every suggestion, and the best ideas from practice become the next feature or the next product.

Propose new software

An engineering problem that deserves a program of its own. Describe the task, who faces it and the standards that govern it.

Share your idea

Improve a program

A feature, a check or a standard for one of our programs. Each keeps a public tracker where you can also support ideas others have posted.

FoundaTrix Studio PileTrix Studio StruTrix Studio

Tell us privately

An idea tied to confidential work, or one you would rather talk through first: write to us directly.

admin@ramisoftsolutions.com

Contact

Talk to us.

For help with a program, start on its own website, where its support page and public issue tracker are. For anything else, including licensing, partnerships and press, email admin@ramisoftsolutions.com.